12″ – 1400 W Max Power, Single 4-ohm Voice Coil, IMPP™ cone, Single 4 Ohm Voice Coil – Component Subwoofer
Features
1400 Watts Max. Power / 400 Watts Nominal Power
12″ IMPP™ Composite Cone
Elastic polymer Surround & polycotton spider
Frequency range: 22 Hz to 1.6 kHz
Speaker Impedance: 4 ohms
Speaker Efficiency: 87 dB (1W/1M)
Mounting depth: 6” (152mm)
Recommended Box volume : 1.5cu.ft (vented) / 1.25cu.ft. (sealed)
| Continuous Power Handling (Rms) – Watts 400 | Frequency Response 22 Hz to 1.6 kHz |
| Maximum Peak Power Handling – Watts 1400 | Nominal Impedance – Ohm 4-Ohm |
| Sensitivity (1W/1M) 87 | System-Type Component |
| CarSoundFit Yes | Cut Out dimensions 11-1/8″, 10 cm |
| Equivalent Compliance (VAS) 56.1 Liters, 2 Cu. Ft. | Free Air ResoNAnce (Fs) 32.1 |
| Linear Excursion (Xmax) 8.25 mm, 0.33″ | Mounting Depth 5-3/8″ |
| Port Diameter 3″, 8 cm | Port Length 6-1/2″, 17 cm |
| Recommended Ported Box Internal volume 42.5 Liters, 1.5 Cu. Ft. | Recommended Sealed Enclosure Volume 35.4 Liters, 1.25 Cu Ft |
| Total Speaker “Q” (Qts) 0.7 | Woofer Dimensions 12″ |
| Basket Material Stamped Metal | Center Cap Material ABS |
| Cone Material IMPP – Composite | Damper Poly cotton Aramid |
| Installation Ring ABS | Magnet Material Ferrite |
| Magnet Weight 46 oz | Surround Material Rubber |
| Surround Type Rolled | Voice Coil Bobbin Aluminum |
| Voice Coil Type Single Voice Coil 4-ohm | Voice Coil wire Copper |
| Wire Terminals Push Type |
