12″ – 1500 W Max power, Glass-fiber & Mica reinforced IMPP™ Cone, Single 4 Ohm Voice Coil – Shallow Mount Subwoofer
Features
1500 Watts Max. Power / 400 Watts Nominal Power
12″ Glass-fiber & Mica reinforced IMPP™ Cone
Rubber Surround & Aramid-fiber dual-spider design
Frequency range: 20 Hz to 1.0 kHz
Speaker Impedance: 4 ohms
Speaker Efficiency: 88 dB (1W/1M)
Mounting depth: 3.5” (89mm)
Recommended Box volume : 0.8cu.ft. (sealed)
| Continuous Power Handling (Rms) – Watts 400 | Frequency Response 20 Hz to 1 kHz |
| Maximum Peak Power Handling – Watts 1500 | Nominal Impedance – Ohm 4-Ohm |
| Sensitivity (1W/1M) 88dB | System-Type Component |
| CarSoundFit Yes | Cut Out dimensions 11-1/8″, 10cm |
| Equivalent Compliance (VAS) 45.6 Liters, 1.61 Cu. Ft. | Free Air ResoNAnce (Fs) 31 |
| Linear Excursion (Xmax) 8.8, 0.35″ | Mounting Depth 3-1/2″ |
| Port Diameter 7.62cm, 3″ | Port Length 5-7/8″, 14.92cm |
| Recommended Ported Box Internal volume 22.6 Liters, 0.8 Cu. Ft. | Recommended Sealed Enclosure Volume 0.8 Cu Ft, 22.6 Liters |
| Subwoofer Grille UD-12GL Sold Separately | Total Speaker “Q” (Qts) 0.54 |
| Woofer Dimensions 12″ |
| Basket Material Stamped Metal | Center Cap Material ABS |
| Cone Material IMPP – Composite | Damper Poly cotton |
| Gasket Polypropylene | Installation Ring Polypropylene |
| Magnet Material Ferrite | Magnet Weight 71.6 oz |
| Surround Material Rubber | Surround Type Rolled |
| Voice Coil Bobbin Kapton | Voice Coil Type Single Voice Coil |
| Voice Coil wire Copper | Wire Terminals Push Type |
